Showing posts with label Upcycling. Show all posts
Showing posts with label Upcycling. Show all posts

Tuesday, 6 December 2016

Christmas Upcycling idea - gift tags from used Christmas crackers

Christmas Upcycling idea - gift tags from used Christmas crackers


Hello everyone,

Today I have been doing a little upcycling. Instead of throwing away some Christmas crackers I decided to use them as gift tags.



The cardboard that crackers are made from is sturdy enough to be used as tags and colourful enough that they make very jolly tags on their own. I used a little star hole punch to create a hole in the top of each tag, a regular hole punch can be used but I just love how festive the Star looks.

Finally I used my favourite Merry Christmas stamp on the back of the tags while leaving enough room to write the name of the person I'm giving the gift to.

On most types of cracker a small piece of string or ribbon is used as decoration so these are perfect for threading through the holes and using to tie your tags to the presents. I used this on a couple of the gift tags below.


These tags are made from scraps of card from three different crackers. By using patterns which compliment each other even a simple shape like the circles I have used here can look like a stylish addition to the basic gift tag shape.


These four gift tags are all made from the same cracker. The cracker was fully patterned so I cut out the best parts of the picture for each tag and didn't need to add any more embellishments. Not bad for something we would normally throw away after finishing off our Christmas pudding.


To cut out my gift tags by using my Fiskars Shape boss set since I found a really useful gift tag shape template. Don't worry if you don't have such a shape cutter. Why not take a gift tag you have and draw around it on the back of the cracker to give you the shape and size and cut them out.

If you'd like to make your own just save those crackers after your Christmas dinner and you'll have a whole lot of pretty coloured card ready to use. The card will have a little curve in it since crackers are bent into a circle but this will be easy to get out by storing the card flat and perhaps putting a heavy book on top to flatten it out. I used my copy of the Encyclopedia of stitches which is a very hefty tome.

If you would like to see any more upcycling ideas here are some links:

Christmas Bauble Upcycling

Upcycling worn out Christmas Baubles
Spiderman Halloween decoration 
How to make a Bloody handprint Halloween decoration from an old Christmas bauble
How to make a dripping bauble Halloween decoration. 
Pokemon Gastly Halloween decoration
How to make a Wrapped sweet Christmas decoration. 
How to make a Squirtle Squad decoration
How to make a Jake the dog decoration
How to make a Chain Chomp Christmas bauble

Other Upcycling

Upcycled bunting from left over wrapping paper
How to make wool covered letters - Kids craft

For the Buzy Bobbins Index page Click here.

Wednesday, 19 October 2016

How to make a Shyguy/Shygal costume mask - cosplay tutorial

How to make a Shyguy costume mask - cosplay tutorial



Hello everyone,
This year I went to May London MCM as a Shygal. What's a Shygal? I hear you all cry, well they are female versions of Shyguys from the Mario games. From what I found out these creatures are only seen in fan art and have not been featured in the games. I assume in the games Shyguys can be male or female since we really can't tell while they wear those masks. This mask design can also be used for a regular Shyguy too since they are the same.

My costume is based on the Shygal in the Baby got DLC video found on YouTube (link below) hence the combination of a blue hood and pink hair.

Baby got DLC (caution may be NSFW)

While making this cosplay I didn't find much by the way of a tutorial for the mask, which is surprising since I thought that these little guys would be quite popular among Cosplayers. So this is why I decided to make a quick tutorial on how I made mine. There are a couple other Tutorials for masks made from foam and other materials but I decided on cardboard since this was meant to be my cheap cosplay. You can choose to use foam instead of cardboard but bear in mind that foam will bend more around the face. I find that this doesn't look right on the cosplay because the mask does not bend on Shyguys.

Anyway without further ado lets get this tutorial started:

What you will need:
Cardboard (I recycled an old cardboard box)
Paint in white and black
A pair of black tights or stockings (ensure they are thin enough that they can be seen through when close up)
Enough thick elastic to go around your head.
Stapler
Glue

Step 1:
Draw around plates to get two of the same circles on your cardboard and cut out ovals for the eyes on each circle. Make sure the ovals are lined up on both circles.


Step 2:
Get out your paints and paint one side of one of your circles white. Once the white layer is dry use black paint to add a oval for the mouth inbetween the eyes.


Step 3:
Take your pair of black tights or stockings and cut out a piece which will cover both eyeholes on your circles.


Step 4:
On the cardboard circle you did not paint use your stapler to staple the piece of stocking over the eye holes.
When stapling each piece make sure that the flat side of the staple is on the outside while the ends of the staple should be on the inside. This is so that the flat side of the staple will be on this side which is against your face. Trust me on this one you really don't want the sharp side of the staple rubbing against your cheek.

Measure out the elastic so it goes around your head but leave a little extra for attaching to the cardboard.
Once the elastic is the right size staple it to either side of the cardboard as shown in the photo. Remember make sure the flat part of the staple is on the outside.

 
The picture above shows the inside edge of the mask. As you can see the tights and elastic are stapled to the same side.

In this picture below you can see the outside of the mask. I have made sure the flat side of the staple is on this side as it is the side which will be against the wearers face. 
 


Step 5

Glue both halves together. Make sure to glue the inside of the stapled piece of the unpainted side of the other piece. 

 
The Cosplay
 
Finally to finish off grab a plain hoodie put it on and put on your mask. You can finish off the look with a pair of plain trousers and a black or brown belt worn over the top of the hoodie.
Here I am wearing a wig because I decided to be a Shygal but you can easily leave it off and become a Shyguy just as easily.
 
It is easy to see through this mask because tights are generally see through when you are close up. However it is a little like wearing dark sunglasses so beware visibility may be a little limited in darker environments. However when wearing the mask outdoors I actually had no problem getting about.

For posts on cosplays I have spotted on my travels here are some links:
Index of Cosplays spotted Cosplays spotted at EMcon 2016
Cosplays spotted at MCM London Expo May 2016 - Part 1
Cosplays spotted at MCM London Expo May 2016 - Part 2

Cosplays spotted at Sheffield Film and Comic con August 2016

However if you are here for more computer game themed posts here are a few links

Miscellaneous Computer games
Link from The Minish Cap
Small Doom logo
Cute Chocobo
Phoenix Wright - Objection
Fidget from Dust: An Elysain Tail

 For the Buzy Bobbins Index page Click here. 

Wednesday, 25 November 2015

How to make cute upcycled bunting from left over wrapping paper

How to make cute upcycled bunting from left over wrapping paper



Hello Everyone,
Being super organised this week I had a whole bunch of presents to wrap and found myself with small scraps of wrapping paper left over which were not large enough for any of the presents. So I came up with this idea to re use the wrapping paper into cute decorations.

This project only requires a little cutting and sticking so could be a great rainy day make with kids who are old enough to use a glue stick and scissors.


What you will need:
Scraps of left over wrapping paper
Card (I used the card from old cereal boxes)
A glue stick or PVA glue
A long piece of string or ribbon
A hole punch, a normal circular one can be used or a shaped one as long as it does not cut too close to the edge of the card.

Step 1

Cut out the shapes for each piece of the bunting out of the card/ cereal box. To make them all the same you can use a template out of paper or card to draw around.

The shape does not have to be triangular, it could also be squares, rectangles, Christmas tree shapes or anything you can imagine. They could also be different shapes all along the bunting if you wished as long as they are roughly the same size just let your imagination run wild!


Step 2
Next glue your shapes on to the spare wrapping paper. You may want to plan this so the prettiest bits are in the middle of your shapes.
Then let the glue dry a little. Once its dry cut out the shapes.

 
At this point you could just leave one side with paper on or put another piece of paper on the back of each shape if the bunting is to be hung somewhere where the back could be seen. Or simply as a way to reverse the bunting for a different look.
 

Step 3
Using your hole punch make a hole in both sides of the cardboard shapes and thread your ribbon or string through each hole as shown below.


I used ordinary parcel string since its strong but won't distract from the colours on the wrapping paper. However a complimentary ribbon is sure to look great here, just use whatever you have spare.

How hang up your bunting by the string. I hung mine over the mantelpiece but it can also hang across walls, shelves or other surfaces. :)

Have fun crafting everyone!

For some more Christmas ideas here are some links
Christmas designs
Christmas stocking maze
Christmas bauble collection
Gingerbread people
Colourful Christmas Crackers
Christmas bauble maze

Christmas Bauble Upcycling
Upcycling worn out Christmas Baubles
Spiderman Halloween decoration
How to make a Bloody handprint Halloween decoration from an old Christmas bauble
How to make a dripping bauble Halloween decoration.
Pokemon Gastly Halloween decoration

 For the Buzy Bobbins Index page Click here.